If you have read the first post on changing the front springs you will probably have a giggle at this one. Simple. If you have 20 minutes up your sleeve consider the rear done.
In this situation, I took the springs from the 4 door model and installed them into the two door. The target goal was 1″ of lift.
Due to this change not being too high you will not need to replace the shocks or worry about the change in ride.
Begin by jacking the rear up:
Next up remove the brake hose by removing the two bolts visible:
It will look a little like this:
Note for me the spring did not need any convincing to be removed.
Go ahead and remove it:
Before (excuse the picture quality):